De Mavimare GF 90 BT is a heavy duty hydraulic steering for outboard motors up to 80 HP.
All parts of this pump and cylinder are made of aluminum material of stainless steel 316 quality.
The bolts and nuts are from A4 quality, which means that this hydraulic control unit can also be used at sea because it is seawater resistant.
This control is recommended for engines from 10 to 60 HP.
If you have an engine that has more than 60 HP, we recommend the Mavimare GF 150 GRT suitable for engines up to 150 HP.
It comes complete with 2 x 5 meter hoses which through heavy compression fittings can be custom made.
These hoses have a maximum working pressure of 200 bar (test pressure 300 bar).
The control itself has a working pressure of maximum 70 bar.
The pump has a pressure relief valve and non-return valves.
Fits any engine and is suitable for engines up to 80 HP.
Suitable for outboard motors of the following brands:
The big advantage of this control is that the mounting rod that
the bracket of the motor must be mounted off 2 halves consists.
This means that the motor not hoisted or disassembled needs to be.
The motor bolts can therefore remain tight and therefore do not need to be re-sealed (for the seal).
The solid mounting rod consists of 2 halves that are twisted together.
The mounting of the control is therefore simple to do yourself.
It is even possible to mount the hydraulic steering when the boat is in the water.
With many other brands of control systems, the motor often has to be disconnected
and lifted up to engage the mounting rod
to slide the bracket off the motor.
Type: GF 90BT
Pump weight: 2.8 kg
Max pressure pump: 70 bar
Max pressure hoses: 200 bar
Number of plungers in pump: 7
Pump volume: 14 cm3
Cylinder volume: 75 cm3
Width cylinder: of 54.5 cm
Hydraulic steering pump (can also be recessed).
- Steering cylinder
- 2 hydraulic hoses (2 x 5 meters).
- 1 bottle of hydraulic oil
- vent hose
- All mounting/fasteners
- Very clear installation manual (in English)